PVC sheet piling. Manufacture. Sell. Install.

PVC sheet piling
PVC sheet piling is the pile with connecting locks for the building up of a solid protective wall. It is an analogue of Larssen steel sheet pile, but made of heavy-duty PVC (polyvinyl chloride) and is widely used in hydrotechnical and engineering construction. Possessing high mechanical resistance, it is stable to rotting, corrosion and rust, and the PVC characteristics allow to use it in aggressive environmental conditions.

Application of PVC sheet piling

Banks protection. The coastline formation.
Construction of artificial channels/basins.
Protection from undermining and flood
Protection from groundwater and hazardous substance leakage
Protection the base of foundation against destruction
Reinforcing of road slope and bridge footing.
The hydrotechnical construction
  • The construction of dams and dikes
  • The creation of water areas and beaches
  • The construction of piers and berth
  • Drainage chanels
  • Reclamation canals for agricultural land
  • Adjusting the direction and current speed of water
  • Protection from undermining and flood
The engineering construction
  • The construction and land reclamation of refuse dump
  • The technical tanks
  • The construction of slime storage
  • The guarding of chemically active storage and dirty areas

Get the consultation

Technical specifications
PVC sheet pile LZ-260/6
Section widthmm 260
Section depthmm 66
Thicknessmm 5.0
Weight per m2kg
Section Moment (Z)cm3/m 86.2
Moment of inertiacm4/m 382.30
Charpy impact strengthkJ/m2 ≥ 40
Strength levelkN-m/m 1.6

Due to its small size and light weight, this sheet pile is widely used in individual construction and landscape design. If you need to make high beds, terraces for a garden or strengthen the walls of a small canal or reservoir on the site - you can do this using a tongue LZ-260/5.

PVC sheet pile LD-200/6
Section widthmm 200
Section depthmm 60
Thicknessmm 6
Weight per m2kg 14.00
Section Moment (Z)cm3/m 376.6
Moment of inertiacm4/m 2658.6
Charpy impact strengthkJ/m2 >40
Strength levelkN-m/m 9.4

Due to its small size and light weight, this pile is widely used in private construction. If you need to protect the bank of the river or lake, to create the artificial basin, to protect the walls of the channel from the ground slide you can do it yourself (DIY) with LD-200.

PVC sheet pile LD-250/8
Section widthmm 250
Section depthmm 90
Thicknessmm 8
Weight per m2kg 21.32
Section Moment (Z)cm3/m 795.70
Moment of inertiacm4/m 8672.70
Charpy impact strengthkJ/m2 >40
Strength levelkN-m/m 18.0
PVC sheet pile LD-303/10
Section widthmm 303
Section depthmm 100
Thicknessmm 10
Weight per m2kg
Section Moment (Z)cm3/m 1484.50
Moment of inertiacm4/m 17818.0
Charpy impact strengthkJ/m2 ≥ 40
Strength levelkN-m/m 31.5
PVC sheet pile LD-303/12
Section widthmm 303
Section depthmm 110
Thicknessmm 12
Weight per m2kg 30.99
Section Moment (Z)cm3/m 1661.30
Moment of inertiacm4/m 21084.40
Charpy impact strengthkJ/m2 >40
Strength levelkN-m/m 37.2
The advantages
Low cost effective of vinyl sheet pile as compared with Larssen steel sheet piling
The less weight of PVC sheet piling reduce the transportation costs
Easy to install. No heavy equipment for installation
Resistance to seasonal temperature drop
Lack of deformation and dimensional changes
Durability 50+ years
Environmentally friendly, not need additional proofing
Recycling material
Photo gallery

Banks protection with PVC sheet piling

The improvement and active use coastlines of different water basins are becoming very important today. So, the main point is the coast protection: to protect banks and builds against the effects of water environment.

 The most up-to-date  technological advances in the extrusion and application of modern chemical additives allow to create a product with high running ability – sheet piling  made of PVC (polyvinyl chloride)

This material (PVC) has a number of benefits  over traditional steel, timber or concrete piling; mainly cost, durability, easy of handling and environment, does not rot or rust

The indisputable advantages of applying vinyl sheet piling in hydraulic engineering construction are the less weight and easy installation without using of heavy equipment that reduce on 50% costs for installation as compare with steel piling, and on 75 % as compare with concrete piling. The PVC sheet piling doesn’t need additional coating and intensive care during the long period of using that can be extended to 50 years.

Besides, the environmentally friendly is one of the most important advantage in applying of vinyl piling.

Benefits of PVC sheet piling:

– High durability

– Mechanical endurance

– Resistance to seasonal temperature drop

– Doesn’t rot or rust

– UV-Resistant

– Design aesthetics

Plastic piling can be installed by mechanical or manual installation. The basic installation methods are:

– driving

– jetting

– digging

During the installation you can use boats, equipment based on excavators and arrows as well as independent stations with manual vibratory hammer.

5 5